Powders and Granular Materials: Challenges and Future Trends

›8:45 (1h45)

Powders and Granular Materials
Serge Mora

› Jean-Jacques Moreau Amphitheater

8:45 - 10:30 (1h45)

Powders and Granular Materials

Jean-Jacques Moreau Amphitheater

Serge Mora

› Granular flow visualization using non-invasive imaging - Indresan Govender, University of KwaZulu-Natal 08:45-09:15 (30min)

› Microscopic features of liquefaction due to cyclic straining - Colin Thornton, University of Birmingham [Birmingham] 09:15-09:30 (15min)

› Creep-like settlement of railway ballast under cyclic loading - Patrick MUTABARUKA, Laboratoire de Mecanique et Genie Civil, Massachusetts Institute of Technology 09:30-09:45 (15min)

› Stress-chains in a triaxial test - Sadegh Nadimi, School of Engineering, Newcastle University 09:45-10:00 (15min)

› Janssen's effect in a granular cell revisited by experiments and numerical simulations - Julien Lehuen, Institut national de la recherche agronomique [Montpellier] 10:00-10:15 (15min)

› Discharge Flow of a Granular Media from a Silo: Confinement Effect in a quasi 2D Silo - Pascale Aussillous, Aix Marseille Univ, CNRS, IUSTI, Marseille 10:15-10:30 (15min)

›10:30 (30min)

Coffee break

› Room 169

10:30 - 11:00 (30min)

Coffee break

Room 169

›11:00 (1h30)

Powders and Granular Materials
Mehrdad Pasha

› Jean-Jacques Moreau Amphitheater

11:00 - 12:30 (1h30)

Powders and Granular Materials

Jean-Jacques Moreau Amphitheater

Mehrdad Pasha

› The challenges and the state of the art in powder bed fusion systems for 3D printing - Ali Emamjomeh, HP, Inc. 16399 West Bernardo Drive San Diego, CA 92127 USA 11:00-11:30 (30min)

› Development of powder flow characterisation methodology for Additive manufacturing process - Mozhdeh Mehrabi, University of Leeds 11:30-11:45 (15min)

› A new device for the characterization of the powder layer quality in the SLS process - Marco Lupo, Universita degli studi di Salerno 11:45-12:00 (15min)

› Capillary Stress and Structural Relaxation in Disordered Granular Materials - Katerina Ioannidou, Massachusets Institute of Technology, Laboratoire de Mécanique et Génie Civil 12:00-12:15 (15min)

› How the device and the process parameters influence milling efficiency and agglomeration ? - Claire Mayer-Laigle, IATE, UMR1208 INRA - CIRAD - University of Montpellier - SupAgro 12:15-12:30 (15min)

›12:30 (1h30)

Lunch

› Room 169

12:30 - 14:00 (1h30)

Lunch

Room 169

›14:00 (1h30)

Powders and Granular Materials
Sadegh Nadimi

› Jean-Jacques Moreau Amphitheater

14:00 - 15:30 (1h30)

Powders and Granular Materials

Jean-Jacques Moreau Amphitheater

Sadegh Nadimi

› DEM Modelling of Pin Milling - WEI PIN GOH, University of Leeds 14:00-14:15 (15min)

› Numerical simulations of particle grinding inside 2D ball mills by Contact Dynamics - Luisa Orozco, Laboratoire de Mécanique et Génie Civil, Centre de recherche du Commissariat à l'Energie Atomique - CEA Cadarache (Saint Paul-lez-Durance, France) 14:15-14:30 (15min)

› Strength and fracture of heterogeneous materials by peridynamic simulations - Xavier FRANK, Ingénierie des Agro-polymères et Technologies Émergentes 14:30-14:45 (15min)

› Numerical Simulation of Fine Particle Deposition by Impact - KAI WU, Southeast University, University of Leeds 14:45-15:00 (15min)

› Peridynamics simulation of particle fracture embodying defects - Nicolas Blanc, Ingénierie des Agro-polymères et Technologies Émergentes 15:00-15:15 (15min)

› Discrete and Gradient Elasticity Cosserat Modeling of Granular Chains - SINA MASSOUMI, Laboratoire de Mathématiques et Modélisation dÉvry (CNRS) 15:15-15:30 (15min)

›15:30 (45min)

Coffee break

› Room 169

15:30 - 16:15 (45min)

Coffee break

Room 169

›16:15 (30min)

Powders and Granular Materials
Saeid Nezamabadi

› Jean-Jacques Moreau Amphitheater

16:15 - 16:45 (30min)

Powders and Granular Materials

Jean-Jacques Moreau Amphitheater

Saeid Nezamabadi

› Numerical modeling of triboelectric separation: application to vegetal powders - Komlanvi Lampoh, INRA 16:15-16:30 (15min)

› Behavior of highly deformable particle systems subjected to uni-axial compression - 16:30-16:45 (15min)

›16:45 (1h)

Round table: 3D Printing
Ali Emamjomeh and Claire Mayer

› Jean-Jacques Moreau Amphitheater

16:45 - 17:45 (1h)

Round table: 3D Printing

Jean-Jacques Moreau Amphitheater

Ali Emamjomeh and Claire Mayer