Programme
| Time |
Event |
|
|
08:00 - 08:45
|
Registration - Registration |
|
|
08:45 - 09:00
|
Welcome (Jean-Jacques Moreau Amphitheater) |
|
|
09:00 - 10:30
|
Powders and Granular Materials (Jean-Jacques Moreau Amphitheater) - Farhang Radjai |
|
| 09:00 - 09:30 |
› Basic properties of cohesive granular materials: DEM results. - Jean-Noël ROUX, Laboratoire Navier, France |
|
| 09:30 - 09:45 |
› Shear-induced diffusion in cohesive granular flows - Matthew Macaulay, Particles and Grains Laboratory, School of Civil Engineering, The University of Sydney |
|
| 09:45 - 10:00 |
› PREDICTION OF FLOWABILITY OF COHESIVE AND NON-COHESIVE POWDER MIXTURES AT HIGH STRAIN RATE CONDITIONS BY DISCRETE ELEMENT METHOD - Mehrdad Pasha, University of Leeds |
|
| 10:00 - 10:15 |
› ASSESSMENT OF POWDER FLOWABILITY AT THE ONSET OF FLOW AND DYNAMIC CONDITIONS - Massih Pasha, The Chemours Company |
|
| 10:15 - 10:30 |
› Cohesive Powder Flow of Faceted Particles in Screw Feeders - Alejandro Lopez, University of Leeds |
|
|
10:30 - 11:00
|
Coffee break (Room 169) |
|
|
11:00 - 12:30
|
Powders and Granular Materials (Jean-Jacques Moreau Amphitheater) - Mojtaba Ghadiri |
|
| 11:00 - 11:30 |
› The challenges of powder flow characterisation and simulation - Tim Freeman, Freeman Technology, UK |
|
| 11:30 - 11:45 |
› Influence of air humidity on flowability of various formulated powders - Shirin ENFERAD, Laboratoire dÉnergétique et de Mécanique Théorique Appliquée, Laboratoire dÍngénierie des Biomolécules |
|
| 11:45 - 12:00 |
› Application of classical laboratory rheometric analyses for the study of the influence of volcanic ash physical properties on their flow behaviour. - Lyes Ait Ali Yahia, Heriot-Watt University [Edinburgh] |
|
| 12:00 - 12:15 |
› The Application of a Drag Force Flow Sensor and Positron Emission Particle Tracking (PEPT) to Evaluate Flow Patterns within a Mixer and the Relationship between Impeller Speed and Force - Rajeev Dattani, Freeman Technology |
|
| 12:15 - 12:30 |
› EFFECT OF PARTICLE ROUGHNESS ON THE BULK DEFORMATION USING COUPLED BOUNDARY ELEMENT AND DISCRETE ELEMENT METHODS - Ali Ghanbarzadeh, University of Leeds |
|
|
12:30 - 14:00
|
Lunch (Room 169) |
|
|
14:00 - 15:30
|
Powders and Granular Materials (Jean-Jacques Moreau Amphitheater) - Jean-Noël Roux |
|
| 14:00 - 14:30 |
› Numerical modelling of fluid-grains interactions - Jean-Yves Delenne, IATE, UMR1208 INRA - CIRAD - University of Montpellier - SupAgro |
|
| 14:30 - 14:45 |
› LBM/DEM numerical modeling of submerged cohesive granular discharge as a field scenario of sinkhole occurrence in flood condition - Jianhua FAN, IRSTEA (National Research Institute of Science and Technology for Environment and Agriculture), BRGM (French Geological Survey) |
|
| 14:45 - 15:00 |
› Saturated granular flows: constitutive modelling under steady conditions - Pietro Marveggio, Politecnico di Milano |
|
| 15:00 - 15:15 |
› Coupling DigiDEM and LBM for fluid-particle interactions - Xiaodong Jia, University of Leeds |
|
| 15:15 - 15:30 |
› LBM/DEM Simulation of Heat Transfer in Granular Suspensions - Lhassan AMARSID, LMGC, CNRS-University of Montpellier |
|
|
15:30 - 16:15
|
Coffee break (Room 169) |
|
|
16:15 - 17:15
|
Powders and Granular Materials (Jean-Jacques Moreau Amphitheater) - Xiaodong Jia |
|
| 16:15 - 16:30 |
› Unsteady discharge rate of granular materials out of a pressurized tank - Pierre Ruyer, Institut de Radioprotection et de Sûreté Nucléaire (IRSN), PSN-RES, SEMIA, LIMAR, Cadarache, St Paul-Lez-Durance, 13115, France |
|
| 16:30 - 16:45 |
› Packings and dense flows for a controlled-cohesion granular material - Maxime NICOLAS, Laboratoire IUSTI UMR CNRS 7343 - Adrien GANS, Laboratoire IUSTI UMR CNRS 7343 |
|
| 16:45 - 17:00 |
› Experimental study of highly strained ganular matter - Jonathan Barés, Laboratoire de Mécanique et Génie Civil |
|
| 17:00 - 17:15 |
› The ductile behavior and microstructure of wet agglomerates - Thanh Trung Vo, University of Montpellier |
|
|
17:15 - 18:15
|
Round Table: Cohesive powders and granular materials (Jean-Jacques Moreau Amphitheater) - Mojtaba Ghadiri and Pascale Aussillous |
|
|
19:30 - 22:00
|
Gala Dinner |
|
| Time |
Event |
|
|
08:45 - 10:30
|
Powders and Granular Materials (Jean-Jacques Moreau Amphitheater) - Serge Mora |
|
| 08:45 - 09:15 |
› Granular flow visualization using non-invasive imaging - Indresan Govender, University of KwaZulu-Natal |
|
| 09:15 - 09:30 |
› Microscopic features of liquefaction due to cyclic straining - Colin Thornton, University of Birmingham [Birmingham] |
|
| 09:30 - 09:45 |
› Creep-like settlement of railway ballast under cyclic loading - Patrick MUTABARUKA, Laboratoire de Mecanique et Genie Civil, Massachusetts Institute of Technology |
|
| 09:45 - 10:00 |
› Stress-chains in a triaxial test - Sadegh Nadimi, School of Engineering, Newcastle University |
|
| 10:00 - 10:15 |
› Janssen's effect in a granular cell revisited by experiments and numerical simulations - Julien Lehuen, Institut national de la recherche agronomique [Montpellier] |
|
| 10:15 - 10:30 |
› Discharge Flow of a Granular Media from a Silo: Confinement Effect in a quasi 2D Silo - Pascale Aussillous, Aix Marseille Univ, CNRS, IUSTI, Marseille |
|
|
10:30 - 11:00
|
Coffee break (Room 169) |
|
|
11:00 - 12:30
|
Powders and Granular Materials (Jean-Jacques Moreau Amphitheater) - Mehrdad Pasha |
|
| 11:00 - 11:30 |
› The challenges and the state of the art in powder bed fusion systems for 3D printing - Ali Emamjomeh, HP, Inc. 16399 West Bernardo Drive San Diego, CA 92127 USA |
|
| 11:30 - 11:45 |
› Development of powder flow characterisation methodology for Additive manufacturing process - Mozhdeh Mehrabi, University of Leeds |
|
| 11:45 - 12:00 |
› A new device for the characterization of the powder layer quality in the SLS process - Marco Lupo, Universita degli studi di Salerno |
|
| 12:00 - 12:15 |
› Capillary Stress and Structural Relaxation in Disordered Granular Materials - Katerina Ioannidou, Massachusets Institute of Technology, Laboratoire de Mécanique et Génie Civil |
|
| 12:15 - 12:30 |
› How the device and the process parameters influence milling efficiency and agglomeration ? - Claire Mayer-Laigle, IATE, UMR1208 INRA - CIRAD - University of Montpellier - SupAgro |
|
|
12:30 - 14:00
|
Lunch (Room 169) |
|
|
14:00 - 15:30
|
Powders and Granular Materials (Jean-Jacques Moreau Amphitheater) - Sadegh Nadimi |
|
| 14:00 - 14:15 |
› DEM Modelling of Pin Milling - WEI PIN GOH, University of Leeds |
|
| 14:15 - 14:30 |
› Numerical simulations of particle grinding inside 2D ball mills by Contact Dynamics - Luisa Orozco, Laboratoire de Mécanique et Génie Civil, Centre de recherche du Commissariat à l'Energie Atomique - CEA Cadarache (Saint Paul-lez-Durance, France) |
|
| 14:30 - 14:45 |
› Strength and fracture of heterogeneous materials by peridynamic simulations - Xavier FRANK, Ingénierie des Agro-polymères et Technologies Émergentes |
|
| 14:45 - 15:00 |
› Numerical Simulation of Fine Particle Deposition by Impact - KAI WU, Southeast University, University of Leeds |
|
| 15:00 - 15:15 |
› Peridynamics simulation of particle fracture embodying defects - Nicolas Blanc, Ingénierie des Agro-polymères et Technologies Émergentes |
|
| 15:15 - 15:30 |
› Discrete and Gradient Elasticity Cosserat Modeling of Granular Chains - SINA MASSOUMI, Laboratoire de Mathématiques et Modélisation dÉvry (CNRS) |
|
|
15:30 - 16:15
|
Coffee break (Room 169) |
|
|
16:15 - 16:45
|
Powders and Granular Materials (Jean-Jacques Moreau Amphitheater) - Saeid Nezamabadi |
|
| 16:15 - 16:30 |
› Numerical modeling of triboelectric separation: application to vegetal powders - Komlanvi Lampoh, INRA |
|
| 16:30 - 16:45 |
› Behavior of highly deformable particle systems subjected to uni-axial compression - Thi Lo VU - Université de Montpellier |
|
|
16:45 - 17:45
|
Round table: 3D Printing (Jean-Jacques Moreau Amphitheater) - Ali Emamjomeh and Claire Mayer |
|
|
